Import Completed....

Sean Malloy · Post by **Sean Malloy** » Sun Mar 20, 2005 5:00 pm

Screen Cap:

<img src="http://www.arcturus.com.au/vault_errors.jpg" />

Which is correct, the part that says 60045 errors, or the one that saus no errors?

I have a 100+mb log file. Do I really need to go through that to find possible errors?

Sean Malloy · Post by **Sean Malloy** » Sun Mar 20, 2005 5:11 pm

examiningthe log file has revealed a lot of pretty critical errors.... Looks like the server started throwing 500 errors after runing for about 2 hours. Gumble grumble.

Looks like its back to square one!

lbauer · Post by **lbauer** » Mon Mar 21, 2005 8:49 am

That does seem rather contradictory. What were error messages?

See the import tips at this link:

http://support.sourcegear.com/viewtopic.php?t=7

You might try importing the database in smaller chunks to see if that works better.

Sean Malloy · Post by **Sean Malloy** » Mon Mar 21, 2005 6:47 pm

Hundreds of these:

22/03/2005 11:38:44 AM - Refreshing connection to the Vault server.

Logged out of the Vault Server.
Connected to Vault.
**Failed** - Second attempt to process $/clients/AQ1 Systems/R&D/AQ1/2.12/source/V1/eepr_map.h - Created
Created ($/clients/AQ1 Systems/R&D/AQ1/2.12/source/V1/Feedctrl.c) at 3/09/2004 2:48:26 PM
Change set type: AddFile
Adding to transaction: $/clients/AQ1 Systems/R&D/AQ1/2.12/source/V1/Feedctrl.c - C:\DOCUME~1\Sean\LOCALS~1\Temp\1\tmp2BFD.tmp
Upload for item $/clients/AQ1 Systems/R&D/AQ1/2.12/source/V1/Feedctrl.c failed too many times, aborting transaction.
Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client.
The specific error was "The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error."
An exception was encountered during the transaction. Exception: The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error. at VaultClientOperationsLib.ClientInstance.UploadItem(ChangeSetItem item, String txID, Int64 totalBytes, Int64& bytesWritten, Byte[]& streamBuffer, Int32& bytesWrittenThisFile, Boolean bIsImport)
at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
Transaction failed
**Failed** - Error trying to commit. Upload failed. Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client. Consult the import log file for the specific error message.
Trace: at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
at VaultClientOperationsLib.ClientInstance.Commit_Import(ChangeSetItemColl givenItems, DateTime dtg, Int32 nUserID)
at VSSImport.WizardForm.ProcessTransaction(String strProgressText, DateTime dtg, Int32 userID)
22/03/2005 11:38:46 AM - Unable to commit for 3/09/2004 2:48:26 PM - $/clients/AQ1 Systems/R&D/AQ1/2.12/source/V1/Feedctrl.c - Created .
Refreshing SourceSafe connection...
Opening: C:\VSS\PROJECTS\AQ1SYSTEMS\srcsafe.ini
User: admin
VSS database open: True

Sean Malloy · Post by **Sean Malloy** » Mon Mar 21, 2005 6:51 pm

22/03/2005 11:49:56 AM - Refreshing connection to the Vault server.

Logged out of the Vault Server.
Connected to Vault.
**Failed** - Second attempt to process $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0006.doc - Created
Created ($/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc) at 20/08/2004 3:30:34 PM
Change set type: AddFile
Adding to transaction: $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc - C:\DOCUME~1\Sean\LOCALS~1\Temp\1\tmp2D06.tmp
Upload for item $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc failed too many times, aborting transaction.
Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client.
The specific error was "The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error."
An exception was encountered during the transaction. Exception: The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error. at VaultClientOperationsLib.ClientInstance.UploadItem(ChangeSetItem item, String txID, Int64 totalBytes, Int64& bytesWritten, Byte[]& streamBuffer, Int32& bytesWrittenThisFile, Boolean bIsImport)
at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
Transaction failed
**Failed** - Error trying to commit. Upload failed. Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client. Consult the import log file for the specific error message.
Trace: at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
at VaultClientOperationsLib.ClientInstance.Commit_Import(ChangeSetItemColl givenItems, DateTime dtg, Int32 nUserID)
at VSSImport.WizardForm.ProcessTransaction(String strProgressText, DateTime dtg, Int32 userID)
22/03/2005 11:49:57 AM - Unable to commit for 20/08/2004 3:30:34 PM - $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc - Created .
Refreshing SourceSafe connection...
Opening: C:\VSS\PROJECTS\AQ1SYSTEMS\srcsafe.ini
User: admin
VSS database open: True

22/03/2005 11:49:57 AM - Refreshing connection to the Vault server.

Logged out of the Vault Server.
Connected to Vault.
Upload for item $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc failed too many times, aborting transaction.
Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client.
The specific error was "The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error."
An exception was encountered during the transaction. Exception: The server had an error processing the file upload but did not return an error header. The remote server returned an error: (500) Internal Server Error. at VaultClientOperationsLib.ClientInstance.UploadItem(ChangeSetItem item, String txID, Int64 totalBytes, Int64& bytesWritten, Byte[]& streamBuffer, Int32& bytesWrittenThisFile, Boolean bIsImport)
at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
Transaction failed
**Failed** - Error trying to commit. Upload failed. Please verify your network settings using the Options dialog under the Tools menu in the Vault GUI Client. Consult the import log file for the specific error message.
Trace: at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
at VaultClientOperationsLib.ClientInstance.Commit_Import(ChangeSetItemColl givenItems, DateTime dtg, Int32 nUserID)
at VSSImport.WizardForm.ProcessTransaction(String strProgressText, DateTime dtg, Int32 userID)
22/03/2005 11:49:59 AM - Unable to commit for 20/08/2004 3:30:34 PM - $/clients/AQ1 Systems/R&D/AQ1/2.13/documentation/design notes/DN0007.doc - Created .
Refreshing SourceSafe connection...
Opening: C:\VSS\PROJECTS\AQ1SYSTEMS\srcsafe.ini
User: admin
VSS database open: True

22/03/2005 11:49:59 AM - Refreshing connection to the Vault server.

Between every single error vault is logging out and then logging back in to the database.

Every single file fails.

Sean Malloy · Post by **Sean Malloy** » Mon Mar 21, 2005 6:56 pm

I've found the problem. Wow what a frigging pain.

Once again it is due to the Vault installer not setting up the right permissions on the Windows\TEMP folder (It bit me before when I couldn't even get vault to work at all because it couldn't write to the TEMP\sgvault folder)

Changed permissions on that, and files are now uploading.

Post by **jclausius** » Mon Mar 21, 2005 9:20 pm

What OS is the Vault server installed on? This is the second issue I've seen on the forum. I'd like to determine if there was some commonality between the two issues.

Also, do you recall what permissions existed in the %windir%\temp and %windir%\temp\sgvault before the installation?

Sean Malloy · Post by **Sean Malloy** » Mon Mar 21, 2005 11:02 pm

Hi Jeff,

From the top of my head (and I could be very wrong)

Administrators, Full Control
Creator Owner, None
All Users, Read

Vault: 3.0.5
O/S: Windows 2000 w/ Service Pack 4

Sean Malloy · Post by **Sean Malloy** » Mon Mar 21, 2005 11:03 pm

also, %windir%\temp\sgvault never existed. I can only assume that that is because the TEMP folder had incorrect permissions so vault couldn't actually create the folder.

Sean Malloy · Post by **Sean Malloy** » Tue Mar 22, 2005 12:31 am

What could cause this problem?

Server unavailable for transaction end
An exception was encountered during the transaction. Exception: Exception of type System.Exception was thrown. at VaultClientOperationsLib.ClientInstance.Commit(ChangeSetItemColl givenItems, Boolean keepCheckedOut, Boolean removeLocalCopy, Boolean bIsImport, DateTime dateImport, Int32 nUserIDImport, Int64& nRevID)
Transaction failed

Got that twice at the end of the import.

Should I rerun the import with Debug logging turned on?

Post by **jclausius** » Tue Mar 22, 2005 8:33 am

Is there anything in the server's log which may indicate some type of problem related to these errors?

Post by **jclausius** » Tue Mar 22, 2005 1:15 pm

What account did you use to grant access?

Post by **jclausius** » Tue Mar 22, 2005 1:26 pm

I was re-reading your security rights, and I'm confused about something else.

According to the Microsoft specifications, installing the .Net framework will grant the ASP.Net account Read/Write/Delete to the %WINDIR%\Temp. However your setup does not have that configuration. Any idea what would have caused that?

Sean Malloy · Post by **Sean Malloy** » Tue Mar 22, 2005 4:45 pm

jclausius wrote:Is there anything in the server's log which may indicate some type of problem related to these errors?

Nothing in the log file. I'm going to re-run the import with Debug logging turned on.

Sean Malloy · Post by **Sean Malloy** » Tue Mar 22, 2005 4:46 pm

jclausius wrote:What account did you use to grant access?

Quick Hack: I just gave Everyone full control to the temp folder. It's only for testing purposes so I'm not worried about security issues.