Bug? APPCRASH
Moderator: SourceGear
-
- Posts: 5
- Joined: Wed Dec 07, 2011 4:09 am
Bug? APPCRASH
Hello!
I setup rules to ignore the comments (such as / * blah * /), but when I try use from console "Diffing to a File" I get the following message
Problem signature:
Problem Event Name: APPCRASH
Application Name: sgdm.exe
Application Version: 3.3.1.1118
Application Timestamp: 4e27199a
Fault Module Name: sgdm.exe
Fault Module Version: 3.3.1.1118
Fault Module Timestamp: 4e27199a
Exception Code: c0000005
Exception Offset: 000000000008a094
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1049
Additional Information 1: dcbc
Additional Information 2: dcbcf55fdaac8c18a104ff0163f9b70a
Additional Information 3: ee9b
Additional Information 4: ee9b284a410736020add7cfc56b25418
ps. I use Windows 7
I setup rules to ignore the comments (such as / * blah * /), but when I try use from console "Diffing to a File" I get the following message
Problem signature:
Problem Event Name: APPCRASH
Application Name: sgdm.exe
Application Version: 3.3.1.1118
Application Timestamp: 4e27199a
Fault Module Name: sgdm.exe
Fault Module Version: 3.3.1.1118
Fault Module Timestamp: 4e27199a
Exception Code: c0000005
Exception Offset: 000000000008a094
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1049
Additional Information 1: dcbc
Additional Information 2: dcbcf55fdaac8c18a104ff0163f9b70a
Additional Information 3: ee9b
Additional Information 4: ee9b284a410736020add7cfc56b25418
ps. I use Windows 7
Re: Bug? APPCRASH
Does it stop crashing when you take out that rule? I tried setting up a similar rule and received no errors.
Can you show me a screenshot of where you created the rule?
Can you show me a screenshot of where you created the rule?
Beth Kieler
SourceGear Technical Support
SourceGear Technical Support
-
- Posts: 5
- Joined: Wed Dec 07, 2011 4:09 am
Re: Bug? APPCRASH
Yes, if I remove the rule that everything works fine.
- Attachments
-
- CommandLine
- test.png (3.61 KiB) Viewed 14013 times
-
- Ruleset
- ruleset.png (87.41 KiB) Viewed 14013 times
-
- Posts: 5
- Joined: Wed Dec 07, 2011 4:09 am
Re: Bug? APPCRASH
And if I open DiffMerge from Program Files and compare 2 files with this rule - everithing works fine too.
Crashing only from commnad line with option "Diffing to a File"
Crashing only from commnad line with option "Diffing to a File"
-
- Posts: 534
- Joined: Tue Jun 05, 2007 11:37 am
- Location: SourceGear
- Contact:
Re: Bug? APPCRASH
A similar crash was observed last week on Ubuntu and I'm in
the process of preparing a 3.3.2 fix release for it and updating all
platforms. I think this might be the same problem.
If you would like to beta test the new binary, that would be great.
Here's a link to the candidate builds:
http://people.sourcegear.com/~jeffh/DiffMerge/
We'll probably release it later this week or early next week
once QA has some time to take a look at it. (To be fair, I did
kinda skip it in on them unannounced.)
Please let me know if you have any problems with this version.
jeff
(Release notes are in Chapter 11 in the manual.)
the process of preparing a 3.3.2 fix release for it and updating all
platforms. I think this might be the same problem.
If you would like to beta test the new binary, that would be great.
Here's a link to the candidate builds:
http://people.sourcegear.com/~jeffh/DiffMerge/
We'll probably release it later this week or early next week
once QA has some time to take a look at it. (To be fair, I did
kinda skip it in on them unannounced.)
Please let me know if you have any problems with this version.
jeff
(Release notes are in Chapter 11 in the manual.)
-
- Posts: 5
- Joined: Wed Dec 07, 2011 4:09 am
Re: Bug? APPCRASH
Hi Jeff,
I installed the new version at the link that you posted but it still does not work
get all the same crash report
Problem Event Name: APPCRASH
Application Name: sgdm.exe
Application Version: 3.3.2.1136
Application Timestamp: 4ede805c
Fault Module Name: sgdm.exe
Fault Module Version: 3.3.2.1136
Fault Module Timestamp: 4ede805c
Exception Code: c0000005
Exception Offset: 0000000000089944
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1049
Additional Information 1: dcbc
Additional Information 2: dcbcf55fdaac8c18a104ff0163f9b70a
Additional Information 3: e5b6
Additional Information 4: e5b6dd508f0084e0d4196f5c8b9f4ce6
I installed the new version at the link that you posted but it still does not work
get all the same crash report
Problem Event Name: APPCRASH
Application Name: sgdm.exe
Application Version: 3.3.2.1136
Application Timestamp: 4ede805c
Fault Module Name: sgdm.exe
Fault Module Version: 3.3.2.1136
Fault Module Timestamp: 4ede805c
Exception Code: c0000005
Exception Offset: 0000000000089944
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1049
Additional Information 1: dcbc
Additional Information 2: dcbcf55fdaac8c18a104ff0163f9b70a
Additional Information 3: e5b6
Additional Information 4: e5b6dd508f0084e0d4196f5c8b9f4ce6
-
- Posts: 534
- Joined: Tue Jun 05, 2007 11:37 am
- Location: SourceGear
- Contact:
Re: Bug? APPCRASH
Darn. And odd that it only happens with the diff-to-file option.
Could you post a zip file with the contents of the Support Dialog
(available from the About Dialog). This will tell me all the various
settings in your ruleset and let me try to exactly replicate your
environment? (You can omit the various seed pathnames, I don't
need them.)
Also, does it occur on all files or just a particular pair of files?
It would be great if you could send a pair of files (with anything
proprietary/sensitive removed) that demonstrate the problem and
let me test with them here.
thanks
jeff
Could you post a zip file with the contents of the Support Dialog
(available from the About Dialog). This will tell me all the various
settings in your ruleset and let me try to exactly replicate your
environment? (You can omit the various seed pathnames, I don't
need them.)
Also, does it occur on all files or just a particular pair of files?
It would be great if you could send a pair of files (with anything
proprietary/sensitive removed) that demonstrate the problem and
let me test with them here.
thanks
jeff
-
- Posts: 534
- Joined: Tue Jun 05, 2007 11:37 am
- Location: SourceGear
- Contact:
Re: Bug? APPCRASH
I was able to reproduce the crash with some test data here.
I've put a new version of the candidate build on my personal
download page. This one is labelled 1138.
You'll need to uninstall the existing 3.3.2.1136 before you can
install the new 3.3.2.1138 (because Windows Installer only respects
the first 3 components of the version number).
http://people.sourcegear.com/~jeffh/DiffMerge/
Please give it a try and let me know how it goes.
thanks,
jeff
I've put a new version of the candidate build on my personal
download page. This one is labelled 1138.
You'll need to uninstall the existing 3.3.2.1136 before you can
install the new 3.3.2.1138 (because Windows Installer only respects
the first 3 components of the version number).
http://people.sourcegear.com/~jeffh/DiffMerge/
Please give it a try and let me know how it goes.
thanks,
jeff
-
- Posts: 5
- Joined: Wed Dec 07, 2011 4:09 am
Re: Bug? APPCRASH
Hi, sorry so long in reply, but I put the 1138 version and everything works fine!
Thank you!
Thank you!
-
- Posts: 534
- Joined: Tue Jun 05, 2007 11:37 am
- Location: SourceGear
- Contact:
Re: Bug? APPCRASH
Thanks for the update.
j
j