At-a-glance drilldown report issue

If you are having a problem using Fortress, post a message here.

Moderator: SourceGear

Post Reply
TelmoSilva
Posts: 15
Joined: Sun May 17, 2009 4:31 pm

At-a-glance drilldown report issue

Post by TelmoSilva » Fri May 22, 2009 3:59 am

When using at-a-glance and drilling down on each individual section (i.e. Open Items, Unassigned, etc.) they all drill down to the correct filter of items.

However, not estimated shows all items in that milestone. Any assistance would be greatly appreciated as this is a great feature as I am unable to see the time estimated as a column on the main grids.

Thanks in advance,
Telmo

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: At-a-glance drilldown report issue

Post by Beth » Fri May 22, 2009 8:10 am

Could you provide me with a screenshot? I'm not quite understanding what you are seeing. I checked here and don't have that occurring. If you don't want to post it here, you can send an email to support at sourcegear.com (attn: Beth) with a link to this forum thread and the screenshot.
Beth Kieler
SourceGear Technical Support

TelmoSilva
Posts: 15
Joined: Sun May 17, 2009 4:31 pm

Re: At-a-glance drilldown report issue

Post by TelmoSilva » Sat May 30, 2009 9:20 am

Beth,

I have sent you by email the required items. Could you please confirm you have received them?

I have no way here to upload images that I know of, so I can't post it.

Telmo

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: At-a-glance drilldown report issue

Post by Beth » Tue Jun 02, 2009 4:45 pm

This has been moved offline.

HS: 216112
Beth Kieler
SourceGear Technical Support

Post Reply